Our Testing Procedures

3DMark

All 3DMark-based tests are done using the most recent version. We test using all three versions of Fire Strike, Both Time Spy and Time Spy Extreme, and Speed Way. Tests to look at ray tracing performance are done with Port Royal when supported and for Nvidia cards that support DLSS, the DLSS subtest is also done at 1440p with the performance setting and DLSS 2.0 as well as a look at DLSS 1, 2, and 3 at 4K.

Unigine Superposition

1080p Extreme and 4k Optimized benchmarks along with the VR Future test are done. The VR test is done at the Oculus resolution

VRMark

Only the Blue room test is run

CS:GO

This test is done using the workshop map called CS:GO Benchmark. You can find more information at this link. https://www.gamingpcbuilder.com/how-to-install-csgo-fps-benchmark-map/  I test at 1080p, 1440p, and 4K resolutions. All auto settings are turned off and detail is set to their highest settings. shadow quality high, model texture detail high, shader detail very high, AA set to 16x, uber shaders enabled

Ghost Recon Breakpoint

Built-in benchmark tested at 1080p, 1440p, and 4k with the Ultra and Medium detail settings

Watch Dogs: Legion

Built-in benchmark testing at ultra and high details. Tested at 1080p, 1440p, and 4k. I also do RTX and DLSS testing on Nvidia cards at 4K using the Ultra detail settings as a base as well.

Borderlands 3

Built-in benchmark testing with the ultra detail setting and medium detail setting, done at full screen with default settings at 1080p, 1440p, and 4k on DX11

Metro Exodus

Using built-in benchmark, testing at ultra and normal details at 1080p, 1440p, and 4k. I also do RTX and DLSS testing at 4K with the ultra-detail base settings for Nvidia cards as well.

World War Z Aftermath

Built-in benchmark in DX11 testing both the Ultra detail and Medium detail levels at 1080p, 1440p, and 4K resolutions

The Division 2

Built-in benchmark at Ultra detail with V-Sync turned off at 1080p, 1440p, and 4k resolutions.

Total War: Three Kingdoms

Built-in benchmark using the Battle Benchmark setting. Tested at 1080p, 1440p, and 4k at both high and ultra detail settings

Far Cry 6

Built-in benchmark tested at 1080p, 1440p, and 4k with the Ultra and Medium detail settings

V-Ray 5

V-Ray 5 benchmark us run with CUDA and RTX settings on cards that support it

Boundary Benchmark

Testing different DLSS detail levels on cards that support it. All testing is done at 4k with RTX on

Bright Memory Infinite RTX Benchmark

Benchmark all of the different RTX detail levels. Resolution at 4k and DLSS on balanced for each test

Passmark Performance Test 10.2

Test using the GPU Compute Score inside of Passmark’s Performance Test 10.2

Blender

Using the standard Blender Benchmark I run the test using the Blender 3.4 setting which tests using the Monster, Junkshop, and Classroom tests.

OctaneBench 2020.1

OctaneBench is designed to test rendering in OctaneRender. RTX and non-RTX are both ran. This is a CUDA-only test so only Nvidia cards are tested

Power Testing

Using a PCat v2 to monitor power between the PCIe slot and the card as well as power through the power cables I test the peak power when running ADIA64, 3DMark Speed Way, 3DMark Time Spy Extreme, FarCry 6 at 4k and Ultra Detail, Watch Dogs Legion at 4K and Ultra detail, and Blender 3.4.0. The results are then averaged as well as the highest result.

Noise Testing

Our Noise testing is done using a decibel meter 18 inches away from the video card on the bottom/fan side of the card. We test at 50% and 100% fan speeds as well as a third test while under load using AIDA64's stress test. This is done using a Protmex PT02 Sound Meter that is rated IEC651 type 2 and ANSI S1.4 type 2. Tests are done set weighted to A and set to a slow response using the max function.  The ambient noise level in the testing area is 33.3 decibels.

 Temperature Testing

Using AIDA64, the GPU stress test is run for 30 minutes or until the result has leveled off. The test is run twice, once with the stock fan profile and a second time with 100% fan speed. During this, I also document the 100% fan speed RPM and document the delta between the fan profile and 100% fan speed as well as get thermal images.