Packaging
The box for our customized Scuf Reflex isn’t any different than the rest of the Reflex models, in fact they all just have the one box, the Pro/FPS/ETC isn’t printed on the front of the box. The box has orange trim down along the bottom and for the Scuf logo as well. The model name is in the middle on the left next to a picture of the controller which from the textured grip is the Pro or FPS model. They also let you know down in the bottom left corner that this is compatible with PlayStation 5. Around on the back, the box has two more pictures of the controller, this time one is the front and the other is the back. Both have small labels showing the key features. Each label then corresponds with the longer feature explanations on the right half of the back of the box which is repeated in 5 languages.
Once you cut the seal the front of the box flips up and right up on top we have our controller. It sits in a vacuum-formed tray in the shape of the Reflex and on top Scuf has cut out foam that sits on the thumbsticks to push on the lid and keep the controller from moving around. Under the controller, the tray does have a thin piece of plastic between it and the controller which I assume is there to avoid any marks on the controller in shipping. Then up under the vacuum-formed tray, you will find the documentation and a small box of accessories. For documentation, you get a safety information booklet and then the user manual which is in color on the outside but black and white inside.
Inside the accessories box, you have two thumbsticks, one is taller and one is shorter, both with domed caps and the Scuf grip design around the outer edge. You also have a sleeved USB cable which you can use to charge the Reflex or hook it up wired. The cable has a heavy-duty black sleeving on it and both ends have Scuf’s own design on them including the orange ring around both. One end is Type-A and the other is Type-C to plug into the Reflex and the cable is 6 feet long. It also comes with a rubber wire tie pre-attached to help you wrap everything up for transport.
Scuf recently also just added a free universal case to go along with their Reflex as well. The case has a hard fabric shell and up on top it has the Scuf logo in the middle. Inside on the bottom, the hexagon shape that Scuf uses on everything is weaved into the fabric. Being a universal case there is more than enough room for the Reflex and you can tuck your cord in with it as well.
Our case shipped with a second USB cable, Scuf’s Gamer Grip, and a set of four thumbsticks were all inside. This combined with the case is their player pack which is an addon that you can include with your controller. The cord is the same as what was in the box with the Reflex with the Type-A to Type-C connection, sleeved 6-foot long cable and it has the orange accent rings and the hexagon design on the plugs. The thumbsticks are the same as well, only this kit has four in total so two of each height, you can see these have that same hexagon design on them as well down at the base and in the grip. Then the gamer grip is unique. This is a clean/lotion that drys your hands out and has no residue. They say it will help you keep a good grip and it is non-slip and non-sticky. It just helps keep your hands from perspiring.
