New Desk Build.

More
16 Jul 2010 01:05 #7181 by Wingless92
New Desk Build. was created by Wingless92
So after having a small azz desk for the last 10 years I have upgraded. The desk that I have know is about 21 years old. It's served its purpose and that's all I can ask. As you can see in the pics below I had to get rid of the Eyefinity setup and only use 2 monitors for the last couple of days. Kinda sucks when your so used to something and then you take it away, lol.

Anyways, I am going to take a couple of photo's with my EVO and see how it goes.

For the first part, I ordered 3 more SteelSeries Quik Mouse Pads. I wanted this to soften the desk. The new desk is 72in long, 36in deep and 30in high. I am not sure of the dimensions of the old desk but i'll post comparison shots of both desks. I now that the new one is going to be a whole lot better, time for pics.




Please Log in or Create an account to join the conversation.

More
16 Jul 2010 12:06 #7185 by Twodavez
Replied by Twodavez on topic Re: New Desk Build.
It must be rough being soo baller :-)
Nice set up. I currently share a desk with my wife, but i'll have my own when we get into our next house! :kiss:

“Always do right. This will gratify some people and astonish the rest.” - Mark Twain

Please Log in or Create an account to join the conversation.

More
16 Jul 2010 16:08 #7186 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
The joys of not being married with no kids and a good paying job I guess. Kinda sucks that I can't sleep with the same person every night though. You married guys have it made IMO.

Please Log in or Create an account to join the conversation.

More
16 Jul 2010 18:14 #7187 by garfi3ld
Replied by garfi3ld on topic Re: New Desk Build.
Looks good, did you get your mounts ordered?

Wes

Please Log in or Create an account to join the conversation.

More
16 Jul 2010 19:51 #7188 by Twodavez
Replied by Twodavez on topic Re: New Desk Build.
Wingless92 wrote:

The joys of not being married with no kids and a good paying job I guess. Kinda sucks that I can't sleep with the same person every night though. You married guys have it made IMO.


There are trade offs, especially since i've got a baby now. B)
Glad your willing to share your fun toys including your Mustang! Anytime you want to hear a crying baby or see her happy smiling face, just let me know ;)

“Always do right. This will gratify some people and astonish the rest.” - Mark Twain

Please Log in or Create an account to join the conversation.

More
17 Jul 2010 01:55 #7190 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
LMAO, i'll remember that Dave. I don't think any kid could take my Mustang away from me. I love that car.

Please Log in or Create an account to join the conversation.

More
17 Jul 2010 02:28 #7191 by Twodavez
Replied by Twodavez on topic Re: New Desk Build.
Wingless92 wrote:

LMAO, i'll remember that Dave. I don't think any kid could take my Mustang away from me. I love that car.


Well you know how they say that babies are chick magnets? If you strapped Audrey, my daughter, into the back of your mustang and told chicks it was your niece, you'd have to bat the ladies away!

“Always do right. This will gratify some people and astonish the rest.” - Mark Twain

Please Log in or Create an account to join the conversation.

More
17 Jul 2010 03:02 #7192 by NitrosDragon
Replied by NitrosDragon on topic Re: New Desk Build.
Twodavez wrote:

Well you know how they say that babies are chick magnets? If you strapped Audrey, my daughter, into the back of your mustang and told chicks it was your niece, you'd have to bat the ladies away!


Can I have her when Wingless is done? :P

[nahy-trohs-drag-uhn]
DISCLAIMER: If my reply offends you, I probably did it on purpose

Please Log in or Create an account to join the conversation.

More
17 Jul 2010 04:14 #7193 by Twodavez
Replied by Twodavez on topic Re: New Desk Build.
NitrosDragon wrote:

Twodavez wrote:

Well you know how they say that babies are chick magnets? If you strapped Audrey, my daughter, into the back of your mustang and told chicks it was your niece, you'd have to bat the ladies away!


Can I have her when Wingless is done? :P


Hey, we've seen the tail you can get, a baby just wouldn't make it fair to the female gender! :P

“Always do right. This will gratify some people and astonish the rest.” - Mark Twain

Please Log in or Create an account to join the conversation.

More
18 Jul 2010 16:43 #7277 by NitrosDragon
Replied by NitrosDragon on topic Re: New Desk Build.
Twodavez wrote:

NitrosDragon wrote:

Twodavez wrote:

Well you know how they say that babies are chick magnets? If you strapped Audrey, my daughter, into the back of your mustang and told chicks it was your niece, you'd have to bat the ladies away!


Can I have her when Wingless is done? :P


Hey, we've seen the tail you can get, a baby just wouldn't make it fair to the female gender! :P


You're far too kind! :)

[nahy-trohs-drag-uhn]
DISCLAIMER: If my reply offends you, I probably did it on purpose

Please Log in or Create an account to join the conversation.

More
21 Jul 2010 18:51 #7369 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
Just got off the phone with Office Max and they will be delivering the desk next week!

The setup is gonna be sick.

As soon as it comes in i'll start taking pics of the new VS old setup.

Please Log in or Create an account to join the conversation.

More
22 Jul 2010 20:50 #7412 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
Well wouldn't ya know it. Fedex just dropped off the desk! To bad that I am going to an Indians baseball game tonight with my dad. When I get home i'll start working on it. It will probably take most of the night so I doubt that i'll get any game time in. Sucks, but atleast i'll have a new desk!

Please Log in or Create an account to join the conversation.

More
22 Jul 2010 21:17 #7413 by garfi3ld
Replied by garfi3ld on topic Re: New Desk Build.
A week equals a day? They have the opposite of valve time?

Wes

Please Log in or Create an account to join the conversation.

More
23 Jul 2010 04:49 #7436 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
Desk is up and rocking. I'll use the SLR tomorrow instead of my EVO. Need some better pics than the ones that I took. So far it's great, still need to clean a few things up but overall i'm very happy with it.

Please Log in or Create an account to join the conversation.

More
23 Jul 2010 20:28 #7445 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
Everything is working and ready to go. Cables are run and hidden. Going to each some lunch and listen to weekend confirmed. I will take some pics and get them up here as soon as possible.

Please Log in or Create an account to join the conversation.

More
23 Jul 2010 20:41 #7447 by garfi3ld
Replied by garfi3ld on topic Re: New Desk Build.
looking forward to seeing it

Wes

Please Log in or Create an account to join the conversation.

More
24 Jul 2010 03:25 #7454 by Wingless92
Replied by Wingless92 on topic Re: New Desk Build.
Gotta take some better pics but since Wes had a chubby to see some pics here ya go, enjoy.

Still working out all the kinks but so far it's running great.







Please Log in or Create an account to join the conversation.

More
24 Jul 2010 03:26 #7455 by garfi3ld
Replied by garfi3ld on topic Re: New Desk Build.
I waited all this time for this????





Looks good

Wes

Please Log in or Create an account to join the conversation.

More
24 Jul 2010 08:58 #7459 by Jolly-Swagman
Replied by Jolly-Swagman on topic Re: New Desk Build.
Desk looks, great, !!

Please Log in or Create an account to join the conversation.

More
24 Jul 2010 15:54 #7466 by garfi3ld
Replied by garfi3ld on topic Re: New Desk Build.
So are you going to attach all of your mouse pads together like I suggested on vent? They would make a wonderful blanket!

Wes

Please Log in or Create an account to join the conversation.

More
24 Jul 2010 16:10 #7472 by jj_Sky5000
Replied by jj_Sky5000 on topic Re: New Desk Build.
very Nice!!!!!!

Please Log in or Create an account to join the conversation.

We have 1083 guests and one member online

supportus