Test Rig and Procedures

 

Test Rig

CPU: AMD Ryzen 3900X

Motherboard: Asus Crosshair VIII HERO WiFi

Memory: G.Skill Trident Z Royal 3600MHz 16-16-16-36

Storage: Corsair MP600 2TB

Cooling - Noctua NH-U12S

Power Supply - Corsair AX1200w

Case - Primochill Wetbench

OS - Windows 10 Pro 64-bit

 

Our Testing Procedures

3DMark

The same goes for the most current version of 3DMark using the Fire Strike benchmark in normal, extreme, and ultra settings. Tests are also run in the DX12 focused Time Spy benchmark as well as the Time Spy Extreme test. Port Royal is also used on video cards that support DirectX Raytracing

Unigine Superposition

1080p Medium, 1080p Extreme benchmarks along with the VR Maximum and VR Future tests, both done at the Vive resolution

VRMark

Cyan and Blue rooms tested, use Average FPS for the result

Borderlands 3

Built-in benchmark testing with the ultra detail setting and medium detail setting, done at full screen with default settings at 1080p, 1440p, and 4k.

Metro Exodus

Using built-in benchmark, testing at ultra and normal details at 1080p, 1440p, and 4k.

The Division 2

Built-in benchmark at Ultra detail with V-Sync turned off at 1080p, 1440p, and 4k resolutions.

Total War: Three Kingdoms

Built-in benchmark using the Battle Benchmark setting. Tested at 1080p, 1440p, and 4k at both Medium and ultra detail settings

World War Z

Tested at 1080p, 1440p, and 4k in both Medium and Ultra Detail using the built-in benchmark.

Shadow of the Tomb Raider

Built-in benchmark, tested using the Medium texture setting and again at the highest texture detail setting. Both tested at 1080p, 1440p, and 4k

Far Cry 5

Built-in benchmark, tested at 1080p, 1440p, and 4k with the Ultra and Medium detail settings

Warhammer 40,000 Dawn of War III

Built-in benchmark, Image and Texture settings set to the maximum setting and V-Sync turned off. Tested at 1080p, 1440p, and 4k

Watch Dogs: Legion

Built-in benchmark testing at ultra and high details. Tested at 1080p, 1440p, and 4k

Shadow of the Tomb Raider

Built-in benchmark, tested using the Medium texture setting and again at the highest texture detail setting. Both tested at 1080p, 1440p, and 4k

Far Cry 5

Built-in benchmark, tested at 1080p, 1440p, and 4k with the Ultra and Medium detail settings

Passmark Performance Test 9

Test using the GPU Compute Score inside of Passmark’s Performance Test 9

Blender

Using the new Blender Benchmark with the Quick Benchmark setting set to use the GPU, not the CPU. The result is in total seconds the test took, lower is better. All cards tests were done using the 2.90 build for compatibility with the latest cards

Basemark GPU

GPU tests were done using the OpenGL and DirectX12 APIs

Geekbench 5

GPU Compute test is run using the OpenGL and the Vulkan tests

Power Usage

Results come from a Kill-A-Watt hooked up in line to the power cord for the test rig. Two tests are done, one using the AIDA64 Stress Test and the second uses the 3DMark Fire Strike benchmark on the Performance setting using the combined test.

Noise Testing

Our Noise testing is done using a decibel meter 18 inches away from the video card on the bottom/fan side of the card. We test at both 50% and 100% fan speeds. The 100% test isn’t a representation of typical in-game noise levels, but it will show you how loud a card can be if you run it at its highest setting or if it gets very hot. Under load testing is also done, measuring the noise levels of the card when under load in AIDA64 over a half hour. This is done using a Protmex PT02 Sound Meter that is rated IEC651 type 2 and ANSI S1.4 type 2. Tests are done set weighted to A and set to a slow response using the max function. The ambient noise level in the testing area is 33.3 decibels using the test settings.

Temperature Testing

Using AIDA64, the GPU stress test is run for 30 minutes or until the result has leveled off. The test is run twice, once with the stock fan profile and a second time with 100% fan speed.

 

Log in to comment

We have 851 guests and one member online

supportus