For some people, you get your computer together and never mess with it again. I, on the other hand, have a problem and as they say, the first thing is to admit you have a problem. I finished up the Crush build and even posted up performance numbers last week. My problem is I keep looking and thinking how much better the build could look with this one change. Once you do that, you are done, right? Nope! Now that you did that, this other thing really needs to be changed. It’s an endless battle. Well with Crush I just HAD to pull it all apart and keep messing with it. I’m actually in the middle of a few different changes, but the biggest was painting the two GTX 1080’s like I had originally planned. So today I’m going to run through how to paint the new GTX 1080/1070 Founders Edition cards for a nice matching look.

Title: Project Build: Crush – Part 5 – Painting a GTX 1080 FE

Written by: Wes

Pictures by: Wes

Build Sponsors/Supporters: Nvidia - Gigabyte - Caselabs - Noctua - Kingston - Seagate - OCZ - Asus - Corsair - CableMods

Amazon Affiliate link: HERE

Links to other Parts: Part 1Part 2Part 3Part 4 – Part 5 Part 6

 

What do you need

Okay before getting started you are going to need a few tools to get your card apart. You will also need the space to work on the card and a proper area to paint. For tools, I needed a 2mm and 2.5mm Allen Wrenchs, a 4mm deep well socket, and PH1 and PH0 sized Phillips head screwdrivers. I used a simple screwdriver set and it had all but the 4mm socket. I have an extensive toolset but I didn’t have a 4mm socket or for that matter a 4mm wrench so I had to run to Sears. Our local store only had a set of tiny wrenches with the smallest being a 4mm. So while I used a wrench, I would HIGHLY recommend no one else do that and to get a deep well 4mm socket for the job.

image 2

image 3

In addition to the tools, you will need some rubbing alcohol, thermal paste, paper towels or a rag you don’t mind getting thermal paste on, and a clean microfiber cloth.

image 21

Then you also need to know exactly how you plan on painting the card and with what paint type and color that you are going to use. I went with a Plasti-Dip because I wanted to have the option to go back later on. You can also paint using a standard paint, but if you do you will also need primer and sandpaper. I spent a lot of time typing to lock down a color that was a close match to the tangerine finish on the Case Labs Bullet BH7 but I ended up going with Hugger Orange from the Plasti-Dip muscle car series. There actually ended up being a great selection of oranges. I only used one can of orange for two cards but if you think you might mess up, getting a second can wouldn’t hurt. I also picked up a standard black to use on the Nvidia SLI bridge.

Here is a link to the exact paint I went with

image 26

 

TL:DR Tool List

PH1 Phillips

PH0 Phillips

4mm Deep Well Socket

2mm Allen Wrench

2.5mm Allen Wrench

Other items needed

Small screw container

Thermal Paste

Rubbing Alcohol

Clean Microfiber cloth

Paper towels

Paint

Primer (if painting with standard paint)

Sandpaper (if painting with standard paint)

 

Log in to comment

We have 1236 guests and no members online

supportus