Pictures and Features

Without the Rapid-I being plugged in, my initial impressions of the keyboard were that it looks a lot like the standard Quickfire Rapid. That look is a little different than what I saw when I reviewed the Rapid back when it launched. Back then the Rapid had a silver shell with a little more Storm branding. Cooler Master cleaned up the styling with a satin black finish that gives the Rapid and Rapid-I a really clean look that will go well with just about anything. When you look straight down on the Rapid-I we can see that they went with a full white backplate, this should keep the LED backlighting really bright and it’s a nice touch when you can see it peaking around the keys. As with the original Rapid, the Rapid-I is a tenkeyless design meaning it doesn’t have the number pad over on the right side of the keyboard. Otherwise the layout is the same as a standard keyboard, and different than the Quickfire XT that I covered almost a year ago with its unique design with a number pad that doubled as the direction pad.

image 8

image 15

image 16

Taking a look from the side profile we can see that Cooler Master went with a standard key profile. The keyboard angles down but there is a slight concave in the key profile. This makes the keys a little easier to reach from the middle row.

image 12

Like previous models the Rapid-I has a removable USB cord. They went with a micro USB over the Mini-USB that we normally see for removable keyboard cords. Not only is this a little smaller, but it is also more universal with almost every phone using the same connection. The cord itself has a heavy duty sleeving over top to for protection. The cable is a little hard to bend, like previous keyboard cords with a braided sleeving over them. This time though it is less of an issue, the previous Rapid plugged in under the keyboard and had a sharp bend right after it, with an external connection there is no issue.

image 13

image 17

image 18

On the opposite side as the cord connection, Cooler Master slipped in the Rapid-I’s only visible branding. This is a LOT less than just about every other manufacture. Frankly you can’t even see the logo unless you turn the keyboard around.

image 14

Like many other keyboards, the Rapid-I takes advantage of a function key to add functionality to the Rapid-I without having to pack it full of additional keys. When holding the function key all of the F keys function differently. The first set on the left (F1 to F4) turn backlighting on and off, change the backlighting brightness, and flip through the different lighting modes. The second set (F5 to F8) adjusts the repeat rate, aka x2 and up adjust a rapid fire mode for your keys. The rest of the F keys are all individual lighting profiles that you can program. On over you have a button for recording those light profiles and also a full set of media keys that double as the page up/down and home keys.

image 19

image 20

image 21

On the flip side of the Rapid-I Cooler Master has all of the required certifications on the name badge as well as the model and serial number. Each corner has a one-inch wide rubber foot to keep the Rapid-I secure. When you need more of an angle, each side has a flip out one-inch foot. The end of each foot is covered in rubber; this means using the feat doesn’t mean less traction.

image 9

image 10

image 11

The Rapid-I is actually available with Cherry Blue, Red, and Brown switches. For my testing, this board has Cherry MX Browns. This works out perfectly because that is my preferred keyswitch, they give a good mix of tactile feedback while not being too noisy. Check out our article on how to pick your keyboard switch to learn more.  For LED lighting the Rapid-I is only available with white backlighting, this looks great with blacked out design and is the most neutral lighting option. It will go with nearly any PC. In the pictures below you can also check out the white back plate that I mentioned before.  

image 5

image 6

The keycaps on the Rapid-I are made out of ABS and “grip coated” according to Cooler Master. This is basically the same finish that their other keyboards have. The font is the same font that some people have complained about in the past, at this point I’ve seen it so much that I hardly notice it anymore. The only weird part is that the S and A as well as the numbers all are less bold than the rest of the letters.

image 7

 

Log in to comment

garfi3ld's Avatar
garfi3ld replied the topic: #34957 06 Jun 2014 17:58
You guys need to check out Cooler Masters new Quickfire Rapid-I, today I took a look at it. I think you will dig it!
trgtprctc's Avatar
trgtprctc replied the topic: #34958 07 Jun 2014 12:22
Very cool lighting modes. I would prefer back lighting other than white, though.
Plague's Avatar
Plague replied the topic: #34959 08 Jun 2014 02:51
if you took all the keys off, you could color the white backplate and make it another color, the keys would still be white, but the glow would be something else. Might be interesting.
garfi3ld's Avatar
garfi3ld replied the topic: #34960 08 Jun 2014 03:43
actually they make LED covers that work amazingly with white LEDs and you can swap them out to other colors as needed



Plague's Avatar
Plague replied the topic: #34965 08 Jun 2014 23:56
wow, that is smart... I didn't give them that much credit. :)

We have 1710 guests and no members online

supportus