NV-FS2 Fan
|
Product Specifications |
|
|
Color |
Black |
|
Height |
46 mm |
|
Width |
136 mm |
|
Depth |
136 mm |
|
Weight |
354 g |
|
Cable length |
2.85m (20cm fan cable, 135cm NV-PS1, 30cm NA-AC10, 100cm NV-EC4-1m) |
|
Scope of delivery |
NF-A12x25 PWM chromax.black premium fan NV-MPG1-12.black multi-purpose gasket 4x NV-MPP1.black multi-purpose pads NA-FG1-12 120mm fan grill NA-FC1 fan controller
Cables & Adaptors NA-AC10 barrel to 4-pin adaptor cable NV-EC4-1m extension cable NV-PS1 power supply US socket adaptor (Type A) EU socket adaptor (Type C) UK socket adaptor (Type G) |
|
Warranty |
6 years |
|
FAN Specification |
|
|
Model |
Noctua NF-A12x25 PWM chromax.black |
|
Bearing |
SSO2 |
|
Max. rotational speed (+/- 10%) |
2000 RPM |
|
Min. rotational speed @ 20% PWM (+/-20%) |
450 RPM |
|
Blade geometry |
A-Series with Flow Acceleration Channels |
|
Airflow |
102.1 m³/h |
|
Acoustical noise |
22.6 dB(A) |
|
Input power (typical) |
1.2 W |
|
Input power (max.) |
1.68 W |
|
Voltage range |
12 V |
|
MTTF |
> 150.000 h |
Next up was the NV-FS2 Fan, like with the airflow amplifier, this didn’t have a stickered-up box, it has a box with it all printed on it. The front has a large picture of the NV-FS2 Fan across it with a black to grey fade in the background. The Noctua logo and their signature brown are along the right edge. The NV-FS2 Fan model name is small and sitting above the Multi-Purpose Fan Set For Device Cooling description which is the largest font. They have three features listed out but these are longer than on the others with more of a description for each. Then on the back, there is a surprising amount of black space with a small picture of the NV-FS2 Fan from the top down and a long description. These descriptions by the way are basically word for word what you find on the top of the product page as well (there isn’t anything wrong with that). When you open the box up the NV-FS2 Fan is sitting with cardboard around it and along with that there are openings that hold the NV-PS1 power supply, and the NA-FC1 fan controller as well. You don’t just get the fan, this is everything needed to be up and running with it.
Other than the metal fan grill that comes pre-installed on the NV-FS2 Fan. We have touched on a lot of what you get in this kit already. You get the Noctua NF-A12x25 fan with the chromax.black finish. Then it has the NV-MPP1 Sx4 and NV-MPG1-12 gaskets installed at the top and bottom of the fan. The fan grill is an old-school wire grill with a black finish on it and the Noctua logo in the center. This also shows off what the two gaskets when combined can do. Sitting it down flat the fan will blow down into or pull the air out of anything you sit in on. But you can also sit it on its edge and blow across something because of the thick gaskets as well. In addition to the power supply and fan controller which I will touch on more in future sections. You do get a few accessories as well. You get a fan cable extension that isn’t sleeved like the cable coming off of the NF-A12x25 and there is also a DC to fan adapter cable with a barrel connection on one end and the 4-pin PWM fan on the other, that is what plugs into the other end of the fan controller or if you wanted to skip the controller and get full speed all of the time you can do that as well. Lastly, you get a small baggie with the four matching black fan screws. I was a little surprised these were here, the overall design here is to just sit it on or next to something with the gaskets but if you wanted to use the NF-A12x25 fan anywhere else you have the screws to do it.
